How to Restore Paint Brushes

Let’s face it; restoring a used brush is a messy process and it can be pretty embarrassing when you’ve got used up a paintbrush.

 

Most people simply throw them away, but there are some who like to restore them so they can have some fun with them.

The first thing to consider is how to restore paintbrushes is what type of brush is the most suitable for your project. You can buy paintbrushes of different types: brass, lacquer, waxy, and so on.

For most projects, a good quality paintbrush will do. If you’re cleaning a tarnished brush and don’t really know how to restore paint brushes, try a cotton swab dipped in rubbing alcohol. This stuff will get out dirt and dust that will cause wear and tear to your brushes.

To begin, you should carefully remove any knots or strings from the base of the paintbrushes. Don’t worry if you’re cleaning a long string paintbrush as it is likely there will be several knots that need to be removed to get at the bristles. A little bit of water with the brush will help it slide easily along the strings.

Next, it’s time to loosen the bristles. This can be done by grabbing the string (if it’s attached) and lightly pulling it off the bristles. It might be necessary to remove the bristles a few times to loosen them. While they’re out, you can start picking out the dirt and dust with a cotton swab dipped in rubbing alcohol.

You can use a rag to clean the bristles, but you’ll find it’s much easier to use a cotton swab dipped in rubbing alcohol. Even the very fine dust will slide off just fine. Once you’ve got the bristles removed, now is the time to consider putting the brushes back together. You can try to reattach the strings but try not to get any glue on the bristles.

A brush head that isn’t straight is one that is difficult to restore. So take a sharpener and make a point of polishing off the rounded end of the brush head to give it a smooth finish. Don’t forget to put a mold release on the bristles of the brush. Most brushes are supplied with a mold release so you can easily restore them.

There’s one more thing to remember before putting the brushes back together. Make sure the bristles are completely wet and then lightly coat the whole area where the brushes join. If you want to be extra sure, you can attach the brush with the mold release first and then apply for the mold release. Then just move on to applying the mold release to the sections where the bristles meet. To keep the brushes work well the next time you use it, you have to check supportingcareers .

The easiest way to go about it is to get a brush holder from your local craft store. It will save you from having to soak the brushes in a bucket of water before you’re ready to put them back together.